Forklift Chain

Chains for Forklift - The life of lift chains on lift trucks can be extended greatly with proper maintenance and care. Like for instance, correct lubrication is actually the most efficient method to be able to prolong the service capability of this part. It is really essential to apply oil occasionally utilizing a brush or other lube application device. The volume and frequency of oil application has to be sufficient so as to stop whichever rust discoloration of oil in the joints. This reddish brown discoloration generally signals that the lift chains have not been properly lubricated. If this particular condition has happened, it is really essential to lubricate the lift chains as soon as possible.

It is common for some metal to metal contact to take place during lift chain operation. This can lead to parts to wear out eventually. The industry standard considers a lift chain to be worn out when 3 percent elongation has occurred. So as to avoid the scary possibility of a catastrophic lift chain failure from happening, the maker greatly suggests that the lift chain be replaced before it reaches 3 percent elongation. The lift chain lengthens due to progressive joint wear that elongates the chain pitch. This elongation is capable of being measured by placing a certain number of pitches under tension.

Another factor to ensuring good lift chain maintenance is to check the clevis pins on the lift chain for indications of wear and tear. The lift chains have been assembled so that the tapered faces of the clevis pin are lined up. Usually, rotation of the clevis pins is often caused by shock loading. Shock loading happens if the chain is loose and then suddenly a load is applied. This causes the chain to go through a shock as it 'snaps' under the load tension. With no proper lubrication, in this case, the pins can rotate in the chain's link. If this particular situation happens, the lift chains must be replaced instantly. It is very important to always replace the lift chains in pairs in order to ensure even wear.


Click to Download the pdf

Forklift Parts

Forklift Fuel Systems

Fuel Systems for Forklifts - The fuel systems task is to supply your engine with the diesel or gasoline it requires to be able to function. If whatever of the fuel system parts breaks down, your engine will not run right. There are the major parts of the fuel system listed underneath: Fuel Tank: The fuel tank holds the fuel....

More

---

Parts for Industrial Scissor Lift

Industrial Scissor Lift Parts - The scissor lift or table lift, is an automated industrial lift that has been tailored to be used in retail, wholesale, manufacturing and production environments. Industrial scissor lifts have been used chiefly within production and manufacturing facilities for many decades to successfully hoist and lower supplies, people and other equipment. The scissor lift is a...

More

---

Drive Unit for Forklifts

Drive Unit for Forklifts - Instead of a transmission, a hydraulic pump is powered by the forklift motor. Hydraulic power from the pump is supplied to hydraulic drive motors which are connected to all the drive wheels so as to provide power to the lift truck.

More

---

Parts for High Reach Forklifts

High Reach Forklift Parts - Forklifts are utilized in practically all warehouse operations and in boat yards and in industrial construction sites. The reach feature of a lift truck is a very important part utilized in various applications such as whenever a shelving system is being utilized to stack pallets. A lift truck operator will utilize the machine's reach feature...

More

---

Forklift Starter and Alternator

Forklift Starter and Alternator - The starter motor these days is usually either a series-parallel wound direct current electric motor that consists of a starter solenoid, that is similar to a relay mounted on it, or it can be a permanent-magnet composition. As soon as current from the starting battery is applied to the solenoid, mainly via a key-operated switch,...

More

---

Part for Electric Forklift

Parts for Electric Forklift - Utilizing a charging stations is the most common way to charge an electric lift truck battery. The charging station would connect along with the battery by utilizing two 8-foot cords. Newer models are equipped along with an automatic charge shut off. This charges the battery hard for 6 hours, next at a lower level for...

More

---

Barrel Clamps

Barrel Clamps - A Barrel Clamp is actually a hydraulic or mechanical attachment for a lift truck. It can be used so as to squeeze the item you would like to transfer using the lift truck and is usually utilized for handling paper rolls, barrels, and kegs. A few designs of barrel clamp attachments even have a revolving function. For...

More

---

Carton Clamp Attachment

Carton Clamp Attachment - One of the most useful attachments designed for the lift truck is the Carton Clamp. It is meant for handling many stuff unsecured on a pallet like for example furniture, domestic devices, frozen cartons or canned goods. Large rubber-faced pads squeeze the sides of the load really gently. The load is then carefully picked up and...

More

---