Swing Carriages

Swing Carriage - The load capacity of a forklift jib has a most of about 1935 pounds to as much as 6000 lbs on either the extended or retracted positions range. You may want to check with a material handling specialist concerning the particular limits of your forklift use. The load capacity rankings are intended for the jib itself and not the forklift or even the utmost load that can be carried safely making use of a particular lift truck. It is very important remember that at any time when whichever accessories such as a forklift jib are attached to the lift truck, the new center of gravity created by the attachment will reduce the general lift capacity of the forklift. There are directions accessible that provide details on the way to accurately gauge these load limits.

Prior to using any forklift jib, make sure that the hooks and shackles are properly secured to the lift truck. Be sure and even double check that the pins are tight. It is necessary that the load calculations have been correctly done and double checked. Bear in mind to take into consideration the fact that rated capacities at times lessen when the boom is in a raised position, whenever the boom is fully extended with telehandlers or even whenever the mast is tilted forward.

Some essential pointers about the modifiable jib are: do not ever pull a load with a lift truck jib accessory, since these attachments are actually meant for vertical lift only. Always pick up the load without letting it move back and forth. Use extreme caution every time a load is lifted to be able to prevent tipping over the truck.

Click to Download the pdf

Forklift Parts

Forklift Fuel Systems

Fuel Systems for Forklifts - The fuel systems task is to supply your engine with the diesel or gasoline it requires to be able to function. If whatever of the fuel system parts breaks down, your engine will not run right. There are the major parts of the fuel system listed underneath: Fuel Tank: The fuel tank holds the fuel....

More

---

Parts for Industrial Scissor Lift

Industrial Scissor Lift Parts - The scissor lift or table lift, is an automated industrial lift that has been tailored to be used in retail, wholesale, manufacturing and production environments. Industrial scissor lifts have been used chiefly within production and manufacturing facilities for many decades to successfully hoist and lower supplies, people and other equipment. The scissor lift is a...

More

---

Drive Unit for Forklifts

Drive Unit for Forklifts - Instead of a transmission, a hydraulic pump is powered by the forklift motor. Hydraulic power from the pump is supplied to hydraulic drive motors which are connected to all the drive wheels so as to provide power to the lift truck.

More

---

Parts for High Reach Forklifts

High Reach Forklift Parts - Forklifts are utilized in practically all warehouse operations and in boat yards and in industrial construction sites. The reach feature of a lift truck is a very important part utilized in various applications such as whenever a shelving system is being utilized to stack pallets. A lift truck operator will utilize the machine's reach feature...

More

---

Forklift Chain

Chains for Forklift - The life of lift chains on lift trucks can be extended greatly with proper maintenance and care. Like for instance, correct lubrication is actually the most efficient method to be able to prolong the service capability of this part. It is really essential to apply oil occasionally utilizing a brush or other lube application device. The...

More

---

Forklift Starter and Alternator

Forklift Starter and Alternator - The starter motor these days is usually either a series-parallel wound direct current electric motor that consists of a starter solenoid, that is similar to a relay mounted on it, or it can be a permanent-magnet composition. As soon as current from the starting battery is applied to the solenoid, mainly via a key-operated switch,...

More

---

Part for Electric Forklift

Parts for Electric Forklift - Utilizing a charging stations is the most common way to charge an electric lift truck battery. The charging station would connect along with the battery by utilizing two 8-foot cords. Newer models are equipped along with an automatic charge shut off. This charges the battery hard for 6 hours, next at a lower level for...

More

---

Barrel Clamps

Barrel Clamps - A Barrel Clamp is actually a hydraulic or mechanical attachment for a lift truck. It can be used so as to squeeze the item you would like to transfer using the lift truck and is usually utilized for handling paper rolls, barrels, and kegs. A few designs of barrel clamp attachments even have a revolving function. For...

More

---