SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Fork Mounted Work Platforms
Fork Mounted Work Platforms - There are specific requirements outlining forklift safety standards and the work platform has to be built by the maker so as to conform. A custom-made designed work platform can be made by a licensed engineer so long as it likewise satisfies the design standards in accordance with the applicable lift truck safety requirements. These custom-made made platforms must be certified by a licensed engineer to maintain they have in truth been manufactured according to the engineers design and have followed all requirements. The work platform needs to be legibly marked to display the label of the certifying engineer or the manufacturer.
There is a few specific information's that are considered necessary to be make on the machinery. One instance for custom-made equipment is that these need an identification number or a unique code linking the design and certification documentation from the engineer. When the platform is a manufactured design, the serial or part number to allow the design of the work platform have to be marked in able to be associated to the manufacturer's documentation. The weight of the work platform while empty, together with the safety standard that the work platform was built to meet is amongst other required markings.
The maximum combined weight of the equipment, people and materials allowable on the work platform is known as the rated load. This particular information must likewise be legibly marked on the work platform. Noting the least rated capacity of the forklift that is required in order to safely handle the work platform can be determined by specifying the minimum wheel track and lift truck capacity or by the make and model of the lift truck that can be used along with the platform. The method for fastening the work platform to the forks or fork carriage should likewise be specified by a licensed engineer or the maker.
Another requirement meant for safety ensures the flooring of the work platform has an anti-slip surface located not farther than 8 inches above the standard load supporting area of the tines. There must be a way given to be able to prevent the work platform and carriage from pivoting and revolving.
Use Requirements
Just qualified drivers are certified to work or operate these equipment for raising workers in the work platform. Both the lift truck and work platform need to be in good working condition and in compliance with OHSR prior to the use of the system to hoist employees. All maker or designer instructions that relate to safe utilization of the work platform must also be available in the workplace. If the carriage of the forklift is capable of pivoting or revolving, these functions must be disabled to maintain safety. The work platform has to be secured to the fork carriage or to the forks in the particular way provided by the work platform maker or a professional engineer.
One more safety standard states that the combined weight of the work platform and rated load must not go over 1/3 of the rated capacity for a rough terrain lift truck. On a high forklift combined loads must not exceed 1/2 the rated capacities for the reach and configuration being utilized. A trial lift is considered necessary to be carried out at each task location immediately prior to lifting employees in the work platform. This process guarantees the forklift and be placed and maintained on a proper supporting surface and also in order to ensure there is sufficient reach to put the work platform to allow the task to be completed. The trial process also checks that the boom can travel vertically or that the mast is vertical.
A trial lift must be done at each task site instantly prior to lifting employees in the work platform to ensure the forklift can be positioned on an appropriate supporting surface, that there is sufficient reach to locate the work platform to allow the task to be finished, and that the mast is vertical or the boom travels vertically. Using the tilt function for the mast could be utilized so as to assist with final positioning at the task location and the mast must travel in a vertical plane. The test lift determines that adequate clearance can be maintained between the work platform and the elevating mechanism of the lift truck. Clearance is also checked in accordance with overhead obstructions, scaffolding, storage racks, as well as whichever surrounding structures, as well from hazards like for instance live electrical wires and energized equipment.
A communication system between the forklift operator and the work platform occupants have to be implemented in order to efficiently and safely control work platform operations. If there are several occupants on the work platform, one individual must be designated to be the primary individual accountable to signal the lift truck driver with work platform motion requests. A system of hand and arm signals ought to be established as an alternative method of communication in case the main electronic or voice means becomes disabled during work platform operations.
In accordance with safety measures, workers are not to be transferred in the work platform between separate job sites. The work platform should be lowered so that employees could exit the platform. If the work platform does not have railing or enough protection on all sides, each and every occupant has to wear an appropriate fall protection system attached to a designated anchor point on the work platform. Employees must perform functions from the platform surface. It is strictly prohibited they do not stand on the railings or use whatever devices so as to increase the working height on the work platform.
Finally, the forklift driver needs to remain within 10 feet or 3 metres of the lift truck controls and maintain visual communication with the lift truck and with the work platform. If the lift truck platform is occupied the operator should adhere to the above requirements and remain in contact with the work platform occupants. These instructions assist to maintain workplace safety for everybody.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
forkliftpartsrhodeisland.com
Email Us
About Us